The DL410 Spray Dryer is a large capacity laboratory spray dryer that produces excellent fine particles ranging from 1 to 100μm.
Spray drying equipment has improved over the years. Today, you can process products from milk powder to antibiotics using spray dryers. Our spray dryer models are suitable for experimental and R&D purposes. You can use our spray dryers for drying, fine powdering, powder mixing, agglomerating, encapsulating, and englobing.
The DL410 large capacity spray dryer produces fine particles from 1 to 100μm, which is considered to be extremely difficult to produce in laboratories. This spray dryer does not require samples to undergo pre or post processing such as filtration, separation, or pulverization. Furthermore, the spray dryer ensures efficient and quick drying of small, expensive, and heat sensitive samples with its easy operation.
Our DL410 spray dryer is useful for preliminary tests for pilot plant or expensive samples, micro capture spray drying research, as a substitute for general laboratory drying methods, and much more. Organic solvents are also supported with the attachment of GAS410 organic solvent recovery unit.
Water evaporation rate: | Max. approx. 3000 ml/h |
Temperature control range: | 40°C - 300°C at inlet |
Temperature control accuracy: | ± 1°C at inlet |
Dry air flow rate: | Max. 1.2 m³/min |
Air Spray Pressure Control Range: | 0 - 600 kPa (0-6 kg/cm²) |
Spraying system: | Two-way nozzle (ø of orifice: 0.7 mm) Nozzle No.3 standard supply (4.5 optional - please inquire) |
Spray/hot air contact system: | Downward spray parallel flow system |
Temperature controller: | PID digital |
Temperature sensor: | K thermocouple |
Stainless pipe heater: | 2kW x 2 at 240V |
Sample liquid feeding pump: | Quantitative peristaltic pump, flow rate variable up to 70ml/min. |
Spray line cleaning: | Needle inside the nozzle to clean the mesh automatically |
Safety devices: | Self-diagnostic functions (e.g. temperature aberration); Sample feed reversal |
Air spray pressure gauge: | Bourdon tube: 600k Pa (6 kg/cm²) |
Exterior dimensions (WxDxH): | 1060 x 880 x 1750 mm |
Weight: | 180 kg |
Power source: | AC 200V-240V single phase 24A |
Included accessories: | Sample liquid tube (Silicone tube - 2 pcs.), safety cover, static removal brush, air hose, exhaust duct |
Let's get to know each other
Would you like to purchase one of our products, do you have any question about a product or about services or do you need further information?
We are always just one phone call away or you can send us a message here